Home Categories Send inquiry

Development And Selection Of Palletizer


Filling machines are widely used in food, medicine, daily chemical and other industries. Due to the diversity of products, failure in production will have an immeasurable impact on production. If there is a fault in daily use, we should also know how to deal with it. Let’s understand it together.

Common faults and solutions of filling machine:

1. The filling volume of the filling machine is inaccurate or cannot be discharged.

2. Whether the speed throttle valve and filling interval throttle valve are closed and whether the throttle valve cannot be closed.

3. Is there any foreign matter in the quick installation three-way control valve? If so, please tidy it up. Is there air in the leather pipe and filler head of the quick installation three-way control valve? If there is air, minimize or eliminate it.

4. Check whether all sealing rings are damaged. If damaged, please replace it with a new one.

5. Check whether the filler valve core is blocked or delayed to open. If the valve core is blocked from the beginning, install it from the beginning. If the opening is delayed, adjust the throttle valve of the thin cylinder.

6. In the quick installation three-way control valve, the elastic force of the coil spring is tightened up and down. If the elastic force is too large, the check valve will not open.

7. If the filling speed is too fast, adjust the filling speed throttle valve to reduce the filling speed.

8. Check whether the clamp and leather pipe buckle are well sealed. If yes, please correct.

9. The magnetic switch is not loose. Please lock after adjusting the quantity each time.